Yasser Zakaria Group - Home
| | عربي
Product Search
 
 

You are here :Home: 6-CK850H Technical Specification

 

6-CK850H Technical Specification
Request more info

Machine Dims* H x W x L (mm) +/-20mm: 2070 x 1750 x 7590
Hopper: Flared hopper 3m wide
Machine Weight: 7000kg
Feed Opening L x W (mm): 1835 x 1045
Approx Bale Size H x W x L (mm): 1090 x 1100 x 2000
Approx Bale Weight (cardboard): Up to 1000kg
Bale Wire: 3.5mm dia 6.2m long black annealed
Number of Wires: 5
Tying Direction: Horizontal
Ejection method: 2nd bale discharge
Compaction Force: 60 tonne
Standard Motor Power/ Cycle time: 15kW/ 62sec
Current requirements: 35A (15 kW motor)
Power requirements: 415V 3 phase (type D Breaker 64 amp)
Plug fitted: 5 Pin plug (3P+E)
Length of Power Cable: 6 metres
Internal control circuit: 24V DC
E-stop: An E-stop on either side of hopper
Door Closer: Hydraulic Door Ram
Hopper photocell: Auto-start
Jam light (red): On front of control panel
Bale Full light (amber) : On front of control panel
Safety Circuit: Dual monitored Category 3
Access for Forklift/Crane: 4 lifting lugs

CK 300VX Technical Specification
Request more info

Machine Dimensions H x W x D(mm): 1985 x 1730 x 1020
Machine Weight (kg): 1270 kg
Feed Opening H x W (mm): 530 x 1164
Bale Size H x W x D (mm): 800 x 1200 x 780
Bale Weight (cardboard): Up to 300kg
Compaction Force: 30 T
Motor: 4 kW
Electric Supply: 415V, 32A plug
Cycle Time (sec): 45
Type of Tie/No. of ties: 12mm Tape / 4 off
Type/No. of Retaining Claws Front: Serrated edge / 4 off
Method of Removing Bales: Automatic tip
Depth of Chamber below Feed Opening: 855mm
Access for Forklift/Pallet: Truck Yes, Side
Electric Rating Standard: IP55
Electric Rating Optional: IP65
Sound Level: 60 dBA

CK151 Technical Specification
Request more info

Machine Dimensions H x W x D (mm): 2420 x 1220 x 1000
Transport Height (rams dropped) (mm): 2060
Machine Weight (kg): 700kg
Feed Opening H x W (mm): 560 x 1100
Bale Size H x W x D (mm): 750 x 1100 x 700
Bale Weight (cardboard): Up to 150kg
Compaction Force: 10 T
Motor: 1.1kW
Electric Supply: 240v, 13A plug
Cycle Time (sec): 90
Type of Tie/No. off: 9mm Tape / 4 off
Type/No. of Retaining Claws Front: Serrated edge / 4 off
Type/No. of Retaining Claws Rear: Swinging / 4 off
Method of Removing Bales: Automatic Tip Mechanism
Depth of Chamber below Feed Opening: 750mm
Access for Forklift/Pallet: Truck Side Access
Electric Rating Standard: IP55
Electric Rating Optional: IP65
Sound Level: 78 dBA

CK151LUD Technical Specification
Request more info

Machine Dimensions H x W x D (mm): 2420 x 1220 x 1030
Transport height (ram dropped) (mm): 2000
Machine Weight (kg): 920
Feed Opening H x W (mm): 530 x 900
Bale Size H x W x D (mm): 750 x 1100 x 700
Bale Weight (cardboard): Up to 150kg
Compaction Force: 10 T
Motor: 1.1Kw
Electric Supply: 240v, 13A plug
Cycle Time (sec): 90
Type of Tie/No. off: 9mm Tape / 4 off
Type/No. of Retaining Claws Front: Serrated edge / 4 off
Type/No. of Retaining Claws Rear: Swinging / 4 off
Method of Removing Bales: Automatic Tip Mechanism
Depth of Chamber below Feed Opening: 750mm
Access for Forklift/Pallet: Truck Side Access
Electric Rating Standard: IP55
Electric Rating Optional: IP65
Sound Level: 78 dBA

CK250 Technical Specification
Request more info

Machine Dimensions H x W x D (mm): 2440 x 1670 x 1160
Machine Weight (kg): 1100
Feed Opening H x W (mm): 600 x 1070
Bale Size W x H x Depth (mm): 780 x 1150 x 700
Bale Weight (cardboard): Up to 250 kg
Compaction Force: 16 T
Motor: 4kW
Electric Supply: 3phase, 415v, 5pin 32 A plug, 3P+E, machine rated breaker
Cycle Time (sec): 55
Type of Tie/No. off: 13mm Tape / 4 off
Type/No. of Retaining Claws Front: Fixed / 3 off
Type/No. of Retaining Claws Rear: Swinging / 4 off
Method of Removing Bales: Automatic Tip Mechanism
Depth of Chamber below Feed Opening: 785mm
Access for Forklift/Pallet: Truck Yes, Side Only
Electric Rating Standard: IP55
Electric Rating Optional: IP65
Rainproof Panel for Power pack: Optional
Rain protection for starter panel: Optional
Sound Level: 85dBA

CK25D Technical Specification
Request more info

Machine Dimensions H x W x D (mm): 2030 x 1775 x 940
Transport Height (ram dropped) (mm): 1780
Machine Weight (kg): 550
Feed Opening L x W (mm): 725 x 500
Bale Size H x W x D (mm): 700 x 700 x 500
Bale Weight: Up to 70 kg
Compaction Force (T): 4
Motor: 1.1kW
Electric Supply: 240v, 13A plug
Cycle Time (sec): 45
Type of Tie/No. off: 9mm Tape / 2 off
Type/No. Of Retaining Claws Front: Fixed / 2 off
Type/No. of Retaining Claws Rear: Swinging / 2 off
Method of Removing Bales: Remove with trolley
Depth of Chamber below Feed Opening: 1000mm
Access for Forklift/Pallet Truck: Side Access
Electric Rating Standard: IP55
Electric Rating Optional: IP65
Sound Level: 70 dBA

CK400HFE Technical Specification
Request more info

Machine Dimensions* H x W x L (mm) +/-20mm: 1790 x 1600 x 4560
Hopper: Hand Fed 1.2m wide,
Machine Weight: 5000kg
Feed Opening L x W (mm)*: 675 x 1045
Approx Bale Size H x W x L (mm)*: 750 x 1150 x 900
Approx Bale Weight cardboard: Up to 450kg
Bale Wire: 3.5mm dia 4.6m long black annealed
Number of Wires: 4
Tying Direction: Vertical
Ejection method: Full bale eject
Compaction Force: 50 tonne
Standard Motor Power/ Cycle Time: 7.5kW/ 105secs 11kW/ 56 secs
Optional Motor Power/ Cycle Time: 15kW/ 38 secs 20A (7.5kW Motor) 27A (11kW Motor)
Current Requirements: 35A (15kW Motor)
Voltage requirements : 415V 3 phase (type D Breaker) 5 Pin plug (3P+E)
Plug Fitted / Current: 32A (7.5kW), 32A (11kW), 64A (15kW)
Length of Power Cable: 6 metres
Internal control circuit: 24V DC
E-stop: An E-stop on either side of hopper
Door Closer: Turn buckle with Ratchet
Hopper photocell: Auto start
Jam light (red) : On front of control panel
Bale Full light (amber) : On front of control panel
Safety Circuit: Dual monitored Category 3
Access for Forklift/Crane: 4 lifting lugs

CK450H Technical Specification
Request more info

Machine Dims* H x W x L (mm) +/- 20mm: 1790 x 1600 x 5380
Hopper options: Hand Fed 1.4m wide or flared hopper 2.2m wide
Machine Weight: 5500kg
Feed Opening L x W (mm): 1320 x 1045
Approx Bale Size H x W x L (mm): 750 x 1150 x 1200
Approx Bale Weight (cardboard): Up to 500 kg
Bale Wire: 3.5mm dia 4.6m long black annealed
Number of Wires: 4
Tying Directions: Vertical
Ejection method: 2nd bale discharge
Compaction Force: 50 tonne
Standard Motor Power/ Cycle Time: 7.5kW/ 87 sec 11kW/ 76 sec
Optional Motor Power/ Cycle Time: 15kW/ 42 sec 20A (7.5kW Motor)
Current Requirements: 27A (11kW Motor) 35A (15kW Motor)
Voltage requirements: 415V 3 phase (type D Breaker) 5 Pin plug (3P+E)
Plug Fitted / Current: 32A (7.5kW), 32A (11kW), 64A (15kW)
Length of Power Cable: 6 metres
Internal control circuit: 24V DC
E-stop: An E-stop on either side of hopper
Door Closer: Turn buckle with Ratchet
Hopper photocell: Auto start
Jam light (red): On front of control panel
Bale Full light (amber) : On front of control panel
Safety Circuit: Dual monitored Category 3
Access for Forklift/Crane: 4 lifting lugs

CK450HFE Technical Specification
Request more info

Machine Dims* H x W x L (mm) +/-20mm:1790 x 1600 x 6340
Hopper options: Hand fed 1.4m wide or flared hopper 2.2m wide
Machine Weight: 6000kg
Feed Opening L x W (mm):1320 x 1045
Approx Bale Size H x W x L (mm): 750 x 1150 x 1200
Approx Bale Weight cardboard: Up to 500 kg
Bale Wire: 3.5 mm dia 4.6m long black annealed
Number of bale tying wires: 4
Tying Direction: Vertical
Ejection method: Full bale eject
Compaction Force: 50 tonne
Standard Motor Power/ Cycle Time: 7.5kW/ 87 sec 11kW/ 76 sec
Optional Motor Power/ Cycle Time: 15kW/ 42 sec 20A (7.5kW Motor)
Current requirements: 27A (11kW Motor) 35A (15kW Motor)
Voltage requirements: 415V 3 phase (type D Breaker) 5 Pin plug (3P+E)
Plug fitted / Current: 32A (7.5kW), 32A (11kW), 64A (15kW)
Length of Power Cable: 6 metres
Internal control circuit: 24V DC
E-stop: An E-stop on either side of hopper
Door Closer: Turn buckle with Ratchet
Hopper photocell: Auto start
Jam light (red): On front of control panel
Bale Full light (amber): On front of control panel
Safety Circuit: Dual monitored Category 3
Access for Forklift/Crane: 4 lifting lugs

CK500V LUD Technical Specification
Request more info

Machine Dimensions H x W x D (mm): 3050 x 1800 x 1230
Transport height (ram dropped) (mm): 2200
Machine Weight (kg): 2200
Feed Opening H x W (mm): 610 x 1100
Bale Size H x W x D (mm): 1050 x 1250 x 830
Bale Weight (cardboard): Up to 500 kg
Compaction Force: 50 T
Motor :5.5kW
Electric Supply: 3 phase, 415v, 5 pin 32A plug (machine rated breaker required) 3 P+E
Cycle Time (sec) 55
Type of Tie/No. off: 3 mm cut and loop wire / 4 off*
Approx. Length of Tie (m): 3.9
Type/No. of Retaining Claws Front: Swinging / 4 off & Fixed / 4 off
Type/No. of Retaining Claws Rear: Swinging / 4 off
Method of Removing Bales: Automatic
Depth of Chamber below Feed Opening: 1000mm
Access for Forklift/Pallet Truck: Yes, Side Only, Front with door open
Electric Rating Standard: IP55
Electric Rating Optional: IP65
Rainproof Panel for Power Pack: Standard
Rain Protection for starter panel: Standard
Sound Level: 85 dBA

CK500V Technical specification
Request more info

Machine Dimensions H x W x D (mm) 3060 x 1800 x 1200
Transport height (ram dropped) (mm): 2210
Machine Weight (kg) 2200
Feed Opening H x W (mm) 610 x 1170
Bale Size H x W x D (mm): 1050 x 1250 x 830
Bale Weight (cardboard): Up to 500 kg
Compaction Force: 50 T
Motor : 5.5kW
Electric Supply: 3 phase, 415v, 5 pin 32A plug (machine rated breaker required) 3 P+E
Cycle Time (sec) 55
Type of Tie/No. off 3 mm cut and loop wire / 4 off*
Approx. Length of Tie (m): 3.9
Type/No. of Retaining Claws Front: Swinging, 4 off & Fixed / 4 off
Type/No. of Retaining Claws Rear: Swinging, 4 off
Method of Removing Bales: Automatic
Depth of Chamber below Feed Opening : 1000
Access for Forklift/Pallet Truck: Yes, Side Only,
Front with door open
Electric Rating Standard: IP55
Electric Rating Optional: IP65
Rainproof Panel for Power Pack: Standard
Rain Protection for starter panel: Standard
Sound Level : 85 dBA

CK500W Technical Specification
Request more info

Machine Dimensions H x W x D (mm): 3060 x 2110 x 1200
Transport height (ram dropped) (mm): 2210
Machine Weight (kg): 2300
Feed Opening H x W (mm): 600 x 1480
Bale Size H x W x D (mm): 1050 x 1550 x 830
Bale Weight: Up to 550 kg
Compaction Force: 50 T
Motor: 5.5kW
Electric Supply: 3 phase, 415v, 5 pin 32A plug (machine rated breaker required) 3 P+E
Cycle Time (sec): 55
Type of Tie/No. off: 3 mm cut and loop wire / 4 off*
Approx. Length of Tying wire (m): 3.9
Type/No. of Retaining Claws Front: Swinging / 5 off & Fixed / 4 off
Type/No. of Retaining Claws Rear: Swinging – 4 off
Method of Removing Bales: Automatic
Depth of Chamber below Feed Opening: 1000mm
Access for Forklift/Pallet Truck: Yes, Side Only, Front with door open
Electric Rating Standard: IP55
Electric Rating Optional: IP65
Rainproof Panel for Power Pack: Standard
Rain Protection for starter panel: Standard
Sound Level: 85 dBA  

 
 

Records 1 to 12 of 41

 

Next Last

 

 

Contact Information
24 El Shekh Mohamed El Nady St.
from Makram Ebaid St.
Nasr City, Cairo - EGYPT
 


T. +2 02 2274 2014
F. +2 02 2274 2018

M. +2 0100166 2977



Our Partners
Mailing List
 
© Yasser Zakaria Group 2008-2017. All rights reserved.
Home About Privacy